ASUS A8V DELUXE RAID DRIVER

Hi Chovy, Or is it anChovy? Hi heartsy, As I have been spending a couple of nights trying to make this bloody A8V Deluxe board to work with 4 HDD’s the way I wanted it and due to the fact that I finally could succeed thanks to a post in this forum https: It certainly set the direction for me to get my winxp system installed. Seriously, more should be done by gimps at Microsellouts to enable easier installations. Typically fdisk was used to add partitions, etc. I can load windows setup run the promise fast track controller 64 bit and then it tell sme that theres no hard drive. Anyway I hope this will help you somewhat.

Uploader: Tetaur
Date Added: 8 February 2004
File Size: 62.22 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 10772
Price: Free* [*Free Regsitration Required]

Seriously, more should be done by gimps at Microsellouts to enable easier installations.

Installing Windows x64 on A8V Deluxe with SATA Raid Promise Drivers

The performance isn’t as good anyway so unless you need 3 or more SATA ports, avoid it. I am going insane. When powering up, and the bios detects first the boot drive and then the data drive it calls them VIA’s.

Remove Advertisements Sponsored Links. Joined Apr Location Chicago subs Posts 1, All works well now- and I am stuffing the drive full raidd odds and ends and such. Along with this problem, I also have the asjs with my OS reading said drives, as I gave up on having both raid options, and set them up for raid0 performance and tried to install OS, I installed drivers as said from floppy, but XP still says cannot install it says it cannot find harddrive.

Last Drivers  HP B109N DRIVERS FOR WINDOWS MAC

When my computer is starting up sometimes when the sata screen is testing my computer it sees the drive but never when i go into the bios settings do deluxxe see the hard drive please help. Both the onboard and you add-in card is on the PCI bus, so your better off just using the onboard.

[SOLVED] Sata Raid configuration on Asus A8V deluxe

Without it I would have taken a sledgehammer to my motherboard. Originally Posted by BWM.

Originally Posted by Tumbleweed Depuxe will allow you to use your RAID. Unfortunately, I do not have a floppy drive or cd burner around.

Could it be this drive is formatted as a dynamic drive and not a basic drive. Please help i am going crazy. Optical Drive continues to show CD The first one is recognized by Windows Explorer. And it comes from THIS webpage!

I thought the hard discs had packed up but after testing with a usb gadget I know they are still ok when plugged into an outside usb socket. Hoepfully this will help people.

Originally Posted by Tang Let it detect the controller, install the drivers, reboot after shutting down and attaching drives.

If either drive fails or becomes corrupt, you will more than likely lose everything on both. Originally Posted by BlueDragon Hi heartsy, As I have been spending a couple of nights trying to make this bloody A8V Deluxe board to work with 4 HDD’s the way I wanted it and due to the fact that I finally could succeed thanks to a post in this forum https: Here is a free trial program that might assist you: If you miss this, you will be warned that there are no hard drives attached.

Last Drivers  GAMESTAR JOYSTICK DRIVER DOWNLOAD

Via Raid Configurations – Asus A8V Deluxe User Manual [Page ]

Typically fdisk was used to add partitions, etc. Turn off that fasttrack controller by disabling it and see what happens. I have no problem booting x86 32 bit windows but whenever i try booting windows 64 my pc just keep restarting before it gets into windows. It will transfer the necessary files to your floppy disk.

ASUS A8V Deluxe RAID 0 setup

I can now use the Promise Controller in IDE mode to run single drives, but that has prompted a question. Thanks so much for this help, it had taken me 2 days of trying to get my A8V-UA board to recognise the SATA hard drive, the most frustrating thign was that neither the azus or fasttrak drivers that came with the ASUS mobo on the support cd worked!

If so, you have to reformat it to get it to work properly.