For the programmer select JDM programmer. Now try running ic-prog again. Is it 84 or 84A? Make sure you have the 6kb driver file in the same folder as the icprog. A programming bar will appear on the screen and you will be able to see the program firstly turn on the 13v indicator LED then activate the clk LED.

Uploader: Moogujora
Date Added: 17 November 2016
File Size: 60.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 31782
Price: Free* [*Free Regsitration Required]

Gayan Soyza Active Member Nov 23, If a fault develops during programming a new window will appear, detailing the fault.

The following dialog box will come up: Then you can enter in the ic-prog software, go to Settings, Options and choose the Misc. You need to copy icprog.

In this mode, the chip can be programmed with 5v on the programming pin pin 10 instead of v on Pin 4. The things you need are: Electro Tech is an online community with overmembers who enjoy talking about and building electronic circuits, projects and gadgets.


IC-Prog starting errors

Click on File top-left. Uncheck all the check boxes under “Communication”.

It happens on all versions. February 8, at You will need the following files: To have one line missing from the port is like buying a book with 15 pages missing!

Articles Top Articles Search resources. The Low Voltage Programming-mode allows the chip to be re-programmed by applying 5v on pin 10 instead of v on pin 4.

IC-Prog C Programmer | Microchip

This was fine before. March nt/2000, at 1: Now try running ic-prog again. Can you tell the part numbers of the transistors in your Programmer? You could put this in a batch file in the IC-Prog directory, eg.

IC PROG Programmer Settings and programming PIC

March 7, at 5: Anyway I’m using Winpic October 17, at He has built the Multi Chip Programmer and 5×7 Display and has sent the following: A window will appear. We can maintain these values, or change them later if we have problems during the programming process. Click here to register now.

Last Drivers  CT5801 DRIVER

There are two common verification failures — data and code. At the end of programming the programming window will disappear. Thanks to [Murph] for the explanation: Gayan Soyza Active Member Nov 22, Ocprog 28, at 2: April 1, at 9: Burning is also called “Programming” or “Downloading a Program” It’s the action of putting a.

LVP 5v on pin Welcome to our site!